The Synco WAir-G1-A1 is an ultracompact, single-channel digital wireless microphone system perfect for recording videos for Instagram, YouTube, and TikTok. It delivers a complete, versatile, and easy-to-use solution for recording dialogue, interviews, and speech directly to a mirrorless/DSLR camera or a mobile device with a 3.5mm input.

It can reach signals up to 70 metres away thanks to its efficient transmitter and one-to-one concentrative response. The signal quality can be perfectly enhanced with the optional low-cut filter and gain control, and the rechargeable lithium battery ensures a 5-hour working period every time.

SyncoderTM Encrypted Transmission Algorithm

The Synco Audio WAir-G1-A1 microphone wireless features the SyncoderTM Encrypted Transmission Algorithm, which is based on the Frequency Hopping Spread Spectrum (FHSS) and allows for 128-bit encrypted signal transmission and automatic channel shift. The precise pickup of audio signals is assured by an audio device that is secure, reliable, and hassle-free. It requires no licensing and frequency mandating and delivers a strong signal wherever.

Steady Transmission Even When the Distance is 70m

Because of the strong microphone transmitter and one-to-one concentrative response, signal transmission is more efficient, and the working range is extended. Even in difficult conditions, the G1(A1) optical wireless microphone transfers distortion-free signals within 70m (Line-of-Sight) and still operate smoothly within 40m.

First DSP Wireless Microphone

The DSP (= digital signal processor) used for the first time in a SYNCO small wireless microphone enables G1(A1) to process audio in real-time. The transmitter's analogue signals are transformed into digital signals for audio re-calibration, and the processed audio is immediately transmitted to the receiver. Therefore, the post-processing will not take much time and the audio performance is ensured to stay high quality.

True Adjustment for Clear, Clean Sound

Wind, air conditioners, and traffic noises below 180Hz are eliminated by the low-cut filter in the SYNCO G1(A1). The gain control button on the wireless microphone receiver increases signal levels quickly and efficiently, ranging from Level 0 to Level 4 with a total of 8dB. The 3.5mm TRS headphone jack helps you to track sound in real-time and make any necessary changes. All this guarantees a clean and clear sound output.

Big Battery Capacity to Support All Day Long

The Synco Audio WAir-G1-A1 microphone features a built-in 400mAh chargeable Li-ion battery which supports 5 hours of recording if condition allowed. This wireless microphone can be charged while in use and can achieve 50 percent power in 40 minutes and 80 percent in an hour. Its status can be seen on the power indicator, which flashes when the battery is low, stays green when charging, and switches off when fully charged.

Small Device with Strong Compatibility

The pocket-sized wireless mic at 2.4 GHz is a camera- and collar-fixable device to hide away from eyes when recording. Its receiver features a 3.5mm TRS audio output that accepts the supplied 3.5mm TRRS/TRS cables, making it compatible with almost every 3.5mm input camera or camcorder, as well as Android/ iOS mobile devices.

Transmitter (TX)

Wireless Transmission

Digital 2.4GHz

RF Frequency Band

2400-2483.5MHz

Working Distance

230ft/70m (LOS area)
131ft/40m (NLOS area)

Latency

12.5ms

Mounting

Pocket Clip

Audio Input

1/8" / 3.5 mm TRS Mic Input

Audio Input Level

1V (0dBV)

RF Output Power

<10mW

Power Requirement

3.3V-4.7V

Battery Type

Built-in Lithium Battery

Battery Charging Time

1.5h

Battery Life

5h

Dimensions

52X42X16mm

Material

Plastic

Weight

35g

Receiver (RX)

Wireless Transmission

Digital 2.4GHz

RF Frequency Band

2400-2483.5MHz

Approximate RF Sensitivity

-81dBm

Working Distance

230ft/70m (LOS area)
131ft/40m (NLOS area)

Latency

12.5ms

Mounting

Pocket Clip

Number of Audio Channels

1

Audio Output

1/8” / 3.5 mm TRS Mic Output
1/8“/ 3.5 mm TRS Headphone Output

Gain

0-4 Level (0 to 8dB)

Audio Output Level

Line Out: 1V, Monitoring: 25-30mW

Power Requirement

3.3V-4.7V

Battery Type

Built-in Lithium Battery, 400mAh

Battery Charging Time

1.5h

Battery Life

5h

Dimensions

52X42X16mm

Material

Plastic

Weight

35g

Microphone

Form Factor

Built-in/External Mic

Sound Field

Mono

Polar Pattern

Omnidirectional

Frequency Response

50Hz-20KHz

Sensitivity

-40dB (±3 dB, re 1V/Pa at 1KHz)

Max. Input SPL

135dB SPL (at 1KHz)

* Specifications subject to change by the manufacturer without notice
  • RX Receiver x1
  • TX Transmitter x1
  • Carrying Bag x1
  • Furry Windshield x1
  • 2-in-1 Charging Cable x1
  • External Lav Mic (With Wind Muff) x1
  • 3.5mm TRRS Phone Cable x1
  • 3.5mm TRS Camera Cable x1

Reviews

* Dispatch timeframes are indications only and may vary for multiple quantities. Timeframes are updated regularly during normal business hours.