Rode VideoMic Pro R Camera-Mount Shotgun Microphone
SKU code: 29803
- Broadcast Quality Audio Recording
- Improved Condenser Capsule
- Rycote Lyre Anti-Noise, Anti-Shock Mount
- Compact, Lightweight Design
- -10dB & +20dB Boost
- 3.5mm Mini-Jack Output
- Powered by 9V Battery
- Suits DSLRs, Mirrorless and Camcorders
For store pickup please contact us
You May Also Like
Bags, Cases & Straps:
Batteries & Chargers:
Tripods & Monopods:
Cleaning & Maintenance:
Audio Equipment:
Cables & Connectivity:
Other:
Compact, Lightweight Design
The Rode Video Mic Pro R with Rycote Shock Mount is perfect for DSLR and digital video movie and documentary makers. Building on the immense success of the previous version, the updated Video Mic Pro is sure to take your production quality to the next level.
Updated Condenser Capsule
Its updated condenser capsule delivers a directional supercardioid polar pattern which delivers an improvement on dynamic range while effectively isolating environmental noise for broadcast-quality audio that is focused on the subject in front of the camera.
Powered by a 9V Battery
The mic is powered by a 9V battery (sold separately) which delivers up to a solid 70 hours of use. Its remarkable noise floor of just 14dB ensures minimal hissing and static noise when no audio is being recorded, delivering a crisp, clean overall result.
Proven Rycote Lyre Shock Mount
Also updated is the Rycote Lyre anti-noise, anti-shock mount which dramatically reduces unwanted handling noise caused by physical knocks and bumps during recording. Made from a hard-wearing thermoplastic material, the Lyre system will never wear out, sag or snap, providing superior longevity compared to elastic suspension style shock mounts.
Customisable Level Control
The rear of the VMPR houses the power switch and a 3-setting level control that provides a neutral, -10dB and impressive +20dB boost delivering better results for your specific shooting environment.
3.5mm Mini-Jack Output
Suitable for DSLRs, mirrorless cameras and camcorders the Rode VideoMic Pro R with Rycote Lyre Suspension Mount uses a 3.5mm mini-jack for maximum compatibility with a broad range of devices. A standard cold-shoe mount delivers straightforward attachment to the top of your camera. The mount also features a 3/8 inch thread at its base for convenient mounting to tripods, boom poles, light stands and more.
Acoustic Principle | Line Gradient Condenser |
Directional Pattern | Supercardioid |
Frequency Response | 40 Hz - 20 kHz (selectable HPF @80 Hz) |
Sensitivity | -32 dB re 1 V/Pa (20 mV @ 94 dB SPL) ± 2 dB @ 1 KHz |
Output Impedance | 200 ohms |
Equivalent Noise | 14 dB |
Maximum Output | +6.9 dBu (@ 1% THD into 1 kOhms) |
Dynamic Range | 120 dB (as per IEC 651) |
Maximum SPL | 134 dB (@ 1 kHz, 1% THD into 1 kOhms load) |
Signal-to-Noise Ratio | 80 dB |
Battery Type | 1 x 9 V alkaline battery (current 7.8 mA) |
Level Control | Three-position (-10 dB, 0, +20 dB) |
High Pass Filter | Two-step (flat, 80 Hz) |
Output Connectors | 1 x 1/8" (3.5 mm) stereo mini-jack (dual mono) |
Low Frequency Roll-Off | 80 Hz High Pass Filter |
Dimensions (HxWxL) | 75 x 100 x 170 mm |
Weight | 85g |
* Specifications subject to change by the manufacturer without notice
- Rode VideoMic Pro R Camera-Mount Shotgun Microphone