This NiSi S6 150mm Filter Holder Kit is customised for the Tamron SP 15-30mm f/2.8 lens. It includes the S6 filter holder and a lens-specific threaded adapter ring that attaches the holder to the lens. This filter holder can support one circular CPL and an optional 150mm rectangular filter at the same time. The kit also comes with a lens cap and a filter pouch that fits the entire kit.

NiSi S6 150mm Filter Holder Frame

This S6 150mm Filter Holder from NiSi features two filter slots for the convenient use of up to two 150mm wide, 2mm thick square or rectangular filters. Each slot is designed to grip an installed filter only along the surface of the filter's edges, so contact with a filter's front or rear-facing surfaces is avoided. Positioning filters is particularly important when using 170mm-long graduated filters whose effect can be adjusted to better suit changing lighting conditions or creative demands by sliding them up or down within a filter slot. The S6 system allows the filter holder to rotate, and it has a lock to hold it in position. The filter holder supports the use of a rotating circular CPL.

This is the same filter holder found in the NiSi S6 Filter Kit. It is the filter holder only and does not include the required S6 adapter rings.

• Compatible with NiSi S6 150mm Filter Holder Kit
• Filter holder only; requires S6 adapter rings
• Holds two 150mm wide, 2mm thick filters
• Compatible with 150 x 150mm and 150 x 170mm filters
• Pull-and-release locking pin on the filter holder allows a reliable connection
• Lock design locks the holder to an adapter ring

NiSi S6 Landscape NC CPL Filter for S6 150mm Holder

The NiSi S6 Landscape NC CPL Filter is designed for use with a NiSi S6 150mm filter holder system. When screwed into a NiSi S6 150mm filter holder adapter ring, it can help to reduce reflections and glare by filtering out light that has become polarized due to reflection from a non-metallic surface. This results in a noticeable reduction of glare and reflections from non-metallic surfaces and an increase in the saturation of skies and foliage. It is constructed from glass for clarity and features an aluminum-alloy filter ring for durability while remaining lightweight.

• Compatible with the NiSi S6 150mm filter system.
• It can be screwed into a NiSi S6 150mm filter holder adapter ring.
• Helps to reduce reflections and glare by filtering out light that has become polarized due to reflection from a non-metallic surface.
• It is constructed from optical glass for clarity and features an aluminum-alloy filter ring for durability while remaining lightweight.
• Clears up haze in distant landscapes and provides more saturated and vivid Colours.
• Strongest effect when used at a 90° angle from the sun.
• Constructed from optical glass for clarity.
• Nano-coating, waterproof coating, and low reflection are some additional features of the filter.
• If using this with an older generation S5 adapter, the S6 holder frame must be used in combination.
• It offers a saturation effect that is approximately 25% greater than a NiSi Pro CPL.

NiSi Protection Lens Cap for NiSi S5 & S6 150mm Filter Holder Kits

This NiSi Protection Lens Cap is designed to attach to a NiSi S5 or S6 150mm Filter Holder Kit's adapter ring when the kit's filter holder is removed. While in use, this lens cap can protect a NiSi S5/S6 circular polarizer filter installed on the adapter ring while the adapter ring remains on a lens.

NiSi S6 150mm Filter Holder Pouch

This S6 150mm Filter Holder Pouch from NiSi provides a secure and convenient transport and storage solution for a NiSi S6 150mm filter holder kit. The pouch's main compartment accommodates the kit's adapter ring together with its filter holder, and a separate pocket can be used to hold the kit's polarizer filter or another separately available screw-in filter compatible with the adapter ring.

This durable and convenient filter pouch can be used to keep its contents protected and organized inside a larger bag or case. The rear of the pouch features a loop to allows it to be fastened to a camera bag or a tripod leg, putting the filter holder kit within more immediate reach. The interiors of this pouch's main compartment include nonabrasive surfaces, and its exterior features a durable nylon construction. It has a hook-and-loop touch tab closure.

• Holds NiSi S6 150mm Filter Holder System
• Filter holder and adapter ring compartments
• Hook-and-loop closure
• Pocket for a polarizer filter
• Compatible with the previous generation S5 System and Q System