Use the edelkrone Controller v2 to automate your camera operations without the need for an app. The motion-controlled sliders, jibs, heads, and dollies made by edelkrone are compatible with this new pocket-sized controller. With the controller v2, you can now control the setup wirelessly from up to 82' away or with a 3.5mm wired link cable that is available separately from up to 131' away. It has a bigger OLED display and can use the Link Hub to simultaneously control several connected devices.

The controller is powered using two separately available AA batteries, and the v2 model has been updated to have a battery life for 10+ hours when using wireless control and 23+ hours when using wired control (depending on the type of AA batteries used). Simply use the directional pad to move your device into position and press one of the three buttons to record the position. Positions can also be set manually and recorded with devices that allow hand control. For each position, speed, acceleration, and any axis can be adjusted, such as slide, swing, pan, tilt, and focus.

New in Controller v2

Double wireless battery life (10+ hours depending on the type of battery used)

Quadrupled wired battery life (23+ hours depending on the type of battery used)

Bigger, easier-to-read OLED display

Wired connection option to a single device, or multiple-device wired connection when used with Link Hub

131' total cable length for a fully wired option

Gesture control mode

Additional Features

Up to an 82' wireless range

Wired control via optional 3.5mm link cable

Instant wireless pairing with your edelkrone device

Join paired group

Firmware upgradeable to gain new functionality

Powered by two AA batteries (not included)

Wrist strap included

Wireless Connection Compatibility

HeadPLUS v2

HeadPLUS PRO v2

Slide Module v2/v3

JibONE v1/v2

DollyONE

DollyPLUS

DollyPLUS PRO

HeadONE

SliderONE v2

SliderONE PRO v2

Pan PRO

FocusPLUS PRO

Wired Connection Compatibility

Slide Module v3

JibONE v2

Pan PRO

HeadPLUS v2

HeadPLUS PRO v2

FocusPLUS PRO

Time-Lapse Programming

The Controller v2 gives you the ability to easily create smooth time-lapse shots with your motion-controlled device. Enter the duration, shutter speed, and interval with the controller, then set the start and end poses with two of the three buttons. Simply press and hold the select button to begin the time-lapse movement.