The DJI Inspire 1 V2.0 Quadcopter with X3 4K Camera and Single Controller is a Ready-To-Fly aircraft with a impressive list of features and a customisable setup. It shoots 4K video and 12 megapixel stills, can be controlled from 5km away and uses GPS, Russian GLONASS, sonar waves, and visual sensors to fly both inside and outdoors. The Inspire will open up a world of aerial cinematography to inspire your imagination and ignite your creative spirit

Advanced 4K Camera and 3 Axis Gimbal Performance

Advanced Zenmuse X3 4K Video Technology

The Inspire 1 V2.0 features DJI’s Zenmuse X3 camera which boasts UHD and DCI 4K video recording capability at a range of frame rate from 24P up to 60P at 1080. This allows you to capture high resolution footage and explore aerial angles in your production. The camera is also capable of recording 12 megapixel still RAW DNG images and you can easily pull a image from the 4K video files.

Camera Performance

The 20mm (35mm equivalent) lens on the X3 is comprised of a rectilinear 9-element construction and it uses a wide f/2.8 aperture to ensure a bright, sharp image quality with a 94° wide field of view. It can shoot single shots as well as capturing 7 frames a second in the burst mode. The camera uses a 1/2.3-inch CMOS sensor with an ISO range of 100-3200 to capture stunning images and video even if the sun sets and your light levels drop.

3-Axis Gimbal Stabilisation

With an advanced 3-Axis Gimbal that receives information from the intelligent flight controller to compensate for flight motion, you can be confident your shots will be always level and smooth. The Gimbal features a custom-made processor which provides ultra-fast compensation for motion and tilt in real-time.

Innovative Aircraft Design

Aerodynamic Retractable Propeller Arms

The Inspire 1 sports 4 propeller arms which act as the quadcopter’s landing gear when resting on the ground but are able to lift out of the camera’s way to provide a full 360° view when the aircraft is flying. They are constructed from light but incredibly durable carbon fibre so they do not weigh down the drone in the air but are able to support the unit on the ground.

Advanced Positioning Systems

Using a combination of Russian GLONASS and GPS satellites the aircrafts positing system is incredibly accurate allowing the drone to hover in the same spot regardless of wind currents. The inclusion of a Vision Position System and Optical Flow technology enables flights indoors. The quadcopter uses visual information and sonar waves which is sent to a dedicated CPU chip to calculate the aircraft’s position for situations where a GPS signal isn’t available.

13-inch Propeller Blades

Reinforced with carbon fibre the 13-inch “Z-Blade” quick release propellers are designed to give optimal performance with increased stability and durability.

Brushless Motors with Curved Magnets

The quadcopter features high end 3510H brushless motors which provide increased motor velocity from the previous model this means that you have better control and increased thrust. Inside each one there are magnets that work to rotate the propellers, the new design utilises curved magnets to decrease the airflow gaps in the motor which leads to much more efficient motor performance.

Smart Power Management

The included intelligent battery allows for better power management by recording the voltage of each cell, the total lifetime charge, and the overall health of the battery. Using advanced algorithms, the inspire 1 is able to alert you based on how far away your drone to let you know when you should bring the aircraft back.

Sophisticated Internal Processors

Using an Inertial Measurement Unit (IMU) that has an in-built accelerometer and a 6-axis Gyroscope the drone is able to generate an incredible amount of environmental data. This information is sent on to the Main Controller which translates it into action, all while receiving and processing a huge amount of other sensory data and ensuring that the aircraft responds to commands instantly.

DJI Lightbridge for Wireless Transmission

Live High Definition Feed

A built-in DJI Lightbridge connection sends a live High Definition 720p video signal when connected to a screen or mobile device from the aircraft.

Maximum 5km Control Range

The live feed allows more accurate control and the 2.4Ghz wireless connection extends the control range to 5km.

Supports Dual Operators

The improved connection allows two controllers to receive a signal from the quadcopter, so that one operator can focus solely on flying while a second operator control the gimbal movement and direction of the camera. One Controller must be designated as a master and the other as a slave unit and they are linked securely with a password. The option to outsource the camera movement to another controller means you can work closely with another operator to capture intricate aerial camera work.

Radio Controller with Dedicated Control Layout

Separate Camera and Gimbal Controls

The Included 2.4Ghz Radio Controller makes aerial film making easier than ever by offering both camera and flight dedicated control buttons and dials. Featuring a built-in dial for gimbal tilt, a return to home button, and record and playback buttons as well as HDMI outputs, a USB port and a dedicated switch for the 3 main flight modes.

Built-in rechargeable Battery

The battery life of the controller is displayed live on the front of the remote and built in alerts trigger when power is running low so you can bring the aircraft home and re-charge with the included charging cable.

Failsafe Return Home Function

The 6000mAh LiPo 2S battery will also trigger a failsafe return to home function in the event of low battery life or a lost remote connection.

Intelligent Flight Modes

The DJI Inspire 1 features several different flight modes to give you complete control over your flights so you can unleash your creative energy with an all-new aerial perspective.

Course Lock

Enables you to specify a master direction so that the forward, back, left and right joystick controls are absolute, allowing you to control the direction of its flight irrespective of the direction the Phantom is facing. This makes it possible to rotate the drone without altering the relative direction of the flight controls for a simpler, more natural flying experience.

Home Lock

Sets the backward control on the joystick to navigate the drone back to the home position regardless of where it is or what direction it is facing. This feature can be useful if the drone is far away and it is difficult to fly the correct direction home.

Point of Interest

Allows you to set a specific object or location as a point of interest, so the drone can continuously orbit around it, allowing you to focus solely on the composition of the shot and camera operation for more precise results.

Follow Me

The drone automatically tracks the connected mobile device and follows you while capturing your movement from a unique aerial perspective.

Waypoint Navigation

Set multiple GPS waypoints and the aircraft automatically flies through each of the waypoints, so you can refine camera movements and easily re-create shots for additional coverage.

DJI Go App for Complete Customisation and Control

The DJI Go App which is available for iOS and Android smart devices allows for extensive control over almost every parameter of the Inspire 1’s settings.

Manual Camera Settings

Camera settings like ISO, video resolution, shutter speed and exposure compensation settings can be modified from the App to provide you with infinite control over the performance of the included camera.

Single tap Auto-Takeoff and Landing with Auto-Return to Home

With a dedicated on screen button you can trigger the quadcopter to initiate a take-off procedure or land. If you like you can even direct the aircraft to return to the location that it took off from by pressing the Auto-Return Home button.

Camera Modes Control

The App also lets you switch between the photo and video mode while at the same time allowing you to touch to aim the camera or start recording. You can also download your photos or videos for easy preview and editing on your mobile device.

Flight Records and Data

It is also able to display all you flight telemetry data like the aircrafts height, distance, speed and more while keeping detailed flight records and archiving your flight achievements.

Live Map, Radar and Interactive Flight Simulator

Providing a live map with a radar makes it easier for you to know exactly where you are filming and flying and an interactive flight simulator means you can perfect your flying abilities without risking your aircraft.

Customisable and expandable

Upgradable Camera

The Inspire 1 is a customisable aerial filming rig which can deliver even better performance when paired with DJI’s Zenmuse X5 camera or X5R Camera to utilise a bigger sensor, an expanded ISO range, a higher megapixel count or even RAW HD video.

Included Micro-SD Card

Equipped with a 16GB Micro-SD card which can provide approximately 36 minutes of 4K footage it is possible to use a larger Micro-SD for even greater storage up to 64GB in capacity.

Higher Capacity Battery

It is possible to use a different battery to increase the flight time of the aircraft with the 5700 mAh optional TB48 Battery.

Lens Filters

You can even add ND filters onto the front of your X3 camera to modify the image results to enjoy even more creative control.

The DJI Inspire 1 Version 2.0 with X3 4K Camera and single controller delivers ultra-high resolution video and images in a comprehensive ready to fly package so you can shoot professional quality aerial shots with minimal fuss. It provides smooth stabilised footage with its 3-Axis gimbal and is guaranteed to enable a whole host of new creative opportunities.