Boya BY-WM6S UHF Wireless Microphone System
SKU code: 47331
Australian Owned, Online Since 2001
Local Contact Centre
Industry Experts, Knowledgeable Team
Australia Wide Delivery
From Beginner to Pro, Affordable Gear
Secure Payment Methods
Key Features:
- 3.5mm headphone output
- Clean Broadcast-Quality Sound for Recording
- Uhf Transmission with 48 Channels
- Includes Omnidirectional Lavalier Microphone
- USB Type-C Ports for Battery Recharging
- Rugged All-Metal Construction
- 70m Operation Range without Obstacles
- Mute Function
You May Also Like
The Essentials:
Action Mounts:
Memory Cards:
Bags, Cases & Straps:
Tripods & Monopods:
Cleaning & Maintenance:
Studio Lighting:
Storage:
Other:
The BOYA BY-WM6S UHF Wireless Microphone System is a next generation wireless mic system that utilises UHF (Ultra High Frequency).
High Compatibility
It is compatible with a variety of devices with a 3.5mm jack or to other devices with an adapter, such as DSLR, CSC, camcorders, smartphones, tablets and audio recorders.
The unit is well suited to most types of content creation including but not limited to streamers, vloggers, journalist, mobile content creators and filmmakers.
Full Featured
The UHF transmission has true-diversity reception that gives you clear audio with a low amount of interference. It provides high-resolution broadcast quality sound with protection for audio integrity and 48 channels to further minimise interference. You can even broadcast and receive between the units for up to 70 metres without obstacles.
The unit is powered by an inbuilt rechargeable battery or can be powered by a Type C USB adapter running DC 5V. An omnidirectional lavalier microphone is also included. LCDs on the unit are easy to read.
At a small size and with a rugged housing this unit is great for creatives of all types. The detachable antenna will easily carry audio in indoor and outdoor environments.
Channel number: |
48 |
Oscillator type: |
PLL synthesizer |
Carrier frequencies: |
556.710-575.980MHz |
Reference deviation: |
+/-5KHZ(-60dBV, 1KHz input) |
Signal to noise ratio: |
82dB or more |
RF output power: |
10mW |
Distortion: |
0.1% or less |
Antenna: |
1/4? wire antenna |
Headphone output level: |
30mW(16 ohm) |
Receive sensitivity: |
-98dBm |
Frequency respose: |
40Hz to 18KHz (+/-3dB) |
Reference audio input level: |
-60dBV (MIC input. 0dB attenuation) |
Power requirement: |
Built-in Li-ion battery 1600mAh |
DC5V (USB TYPE-C) |
|
Dimensions: |
60x24x90mm (2.4”x0.9”x3.5”) |
Weight: |
149g (5.3oz) |
* Specifications subject to change by the manufacturer without notice
- A body-pack transmitter (TX6S)
- A portable receiver (RX6S)
- Omni-directional lavalier microphone
- 3.5mm TRS to TRS audio output cable
- Type-C to USB-A connect cable (x2)
- 3.5mm TRS to XLR Male Output Cable
- Microphone clip
- 3.5mm TRS to TRRS audio output cable Cold-shoe mount adapter
- Wind screen Belt clip (x2)