EZ sensor cleaning VDust Plus multi ingradient, Iso alcoholic solution, removes oil fast, evaporates fast, excellent for cleaning mirror with DHAP orange swab, streak free motion, best used with DHAP orange swab excellent to be used on fluorine coated sensor, compatible with both DHAP orange and Ultra MXD-100 green swab.
orange DHAP V swab patented Vshape results best maneuverability inside chamber, used in high end industrial optic cleaning such as space optical lenses, woven fabric prevents scratches, holds liquid the best, thin and extremely soft, only compatible with VDust Plus solution, streak free motion of the swab is due to its patented Vshape, reaches the corner best, excellent for mirror cleaning when used with VDust Plus.
Not compatible with sensor clean or smear away. Select from 1.6x (16mm), 1.3x (20mm) or 1.0x (24mm) swab sizes using the drop-down menu above. Please click here to determine the correct swab size for your particular camera. Please Note: Visibledust sensor cleaning solutions and swabs are calibrated to work together to produce optimal and safe results. Please DO NOT USE alternative solutions with our swab. A simple grain of quartz which is found in cheaper solutions are enough to produce an expensive scratch on the low pass filter. Our solutions are manufactured to the highest standard of quality that is practiced in pharmaceutical industries. Visibledust solutions are calibrated for NORMAL evaporative rates: 1. to keep the swab moist at all time to reduce the risk of scratch 2. to increase the cleaning power, less swabbing more economical 3. to reduce friction by being moist all time during swabbing The potential risk of FAST evaporative solutions used as sensor cleaning are the following: 1. an increase in the risk of damage and stress to sensor coating by using premature dry swab 2. a great reduction in cleaning power by shortening the contact time between contaminants and solution due to the increased evaporation rate of the solution 3. increase in friction by using a premature drying swab, resulting in static charge build up leading to an even greater dust accumulation on the sensor Our cleaning liquids are intended to be placed on the swab first, so the concern for liquid seeping through the sensor is not valid or accurate. On the other hand, the disadvantages of a generic brand or FAST evaporative liquid used for sensor cleaning may in fact may cause damage to the sensor by requiring repeat swabbing and is not recommended. | 
