Specifications

Power requirements

DC 6.0 V

Batteries recommended for use

AA alkaline dry batteries (LR6) x 4 /
AA rechargeable nickel metal hydride batteries (Ni-MH) x 4

Charging time (from full flash until the [TEST/CHARGE] button lights)

Approx. 7 sec: AA alkaline dry batteries
Approx. 5 sec: AA rechargeable nickel metal hydride batteries

Firing period

Approx. 1/20,000 to 1/500 sec
(varies depending on the flash intensity; FP firing excluded)

Number of flashes (with full flash)

Approx. 120 flashes: AA alkaline dry batteries
Approx. 140 flashes: AA rechargeable nickel metal hydride batteries
(differs depending on the photo taking conditions)

Flash modes

TTL AUTO / AUTO / MANUAL / FP TTL AUTO / FP MANUAL

Bounce angle

Upward: 0 to 90 degrees
Downward: 0 to 7 degrees
Toward the right: 0 to 90 degrees
Toward the left: 0 to 180 degrees

Power-saving mode

Coupled to power-saving mode of a digital camera having communication capability

AF assist lamp

Only for combinations with phase-difference AF system digital camera having communication capability. Approximate distance enabling automatic lighting at low-brightness levels: 0.7 to 7 m. (differs depending on the digital camera and type of lens used)
* Not available when used with LUMIX G series as they adopt contrast AF system.

Guide number

Automatically selected
50: At 42 mm setting (85 mm equivalent to a 35 mm camera)
28: At 12 mm setting (24 mm equivalent to a 35 mm camera)
18/20 selected: When the wide panel is used

Lighting angle

Automatically selected

* When “FOUR THIRDS” applies as the ZOOM display

Dimensions

Approx. 79.4 (W) x 141.1 (H) x 107.1 (D) mm
(excluding the projecting parts)

Mass

Approx. 375 g (main unit)
Approx. 455 g (including batteries)

Operating temperature

0 to 40 °C

Operating humidity

10 to 80 % (no condensation)